TinyGateway PoE Wirepas

TinyGateway PoE Wirepas is an innovative, low-power and low-cost Wirepas Mesh gateway, with Ethernet PoE connectivity, compatible with Wirepas Mesh 2.4GHz networks (sink node).
TinyGateway PoE Wirepas is based on ESP32 S3 embedded SoC, integrated with peripheral for Ethernet connectivity 802.3af support. Wirepas sink is based on nRF52832 SoC.
TinyGateway PoE Wirepas is provided in a compact light-weight plastic enclosure suitable for wall or ceiling installation. Power supply is provided through USB-C or RJ45 PoE connector.

Key features

Low-power Wirepas gateway with Ethernet (PoE) connectivity with full support of Wirepas gateway drivers for MQTT connection
Supported Wirepas stack: 5.x (up to 5.3)
Operating modes: Wirepas Sink device
Network interface: Ethernet PoE 802.3af
Compatible with Wirepas Network Tool (WNT) backend or with custom back-end, cloud or on-premises
Fully compliant with Wirepas remote MQTT APIs
Web UI manager dashboard and HTTP APIs for configuration and management

Hardware

Platform: Espressif Systems ESP32S3WROOM-1
Processor: ESP32-S3 series, Xtensa® dual-core 32-bit LX7 microprocessor, up to 240MHz
Memory: 384 KB ROM, 512 KB SRAM, Up to 8 MB PSRAM
Connectivity: PoE (802.3af), Wirepas Mesh 2.4GHz (v5.x)
User interfaces: Power-on LED, Wirepas LED, Status LED, factory-reset button

Ethernet specifications

Protocol: IEEE 802.3af
Connector: RJ45

Wirepas Mesh specifications

Core module: Nordic Semiconductor nRF52832 SoC, 32-bit ARM Cortex-M4
Protocol: Wirepas Mesh 2.4GHz, v5.x (up to 5.3)
Frequency: band 2.402 to 2.480 GHz
Channel spacing: 2 MHz
Sensitivity: -96 dBm
TX power: 4dBm (max.)
Antenna type: Planar Inverted F-antenna
Antenna gain: 2dBi

Power supply

Power voltage: (a) USB: 5Vdc; (b) PoE: 44–57Vdc
Power connector: (a) USB: USB-C connector; (b) PoE: RJ45 connector
Current: max. 250mA @5Vdc USB

Mechanical specifications

Material: Recyclable ABS plastic (flame-resistant UL94V-0)
Color: White
Size: 124 x 100 x 35 mm (including flanges)
Weight: 200 gr (including flanges)
Protection: IP40
Opening: 4x M2.5 self-healing screws on back panel
Wall fastening: 2x M3.5 screws (not included) for lateral wall-mounting flanges