NEW

TinyGateway WiFi Outdoor BLE

TinyGateway WiFi Outdoor BLE is the rugged outdoor version of TinyGateway WiFi, low-power and low-cost Bluetooth LE gateway.
TinyGateway WiFi BLE is based on ESP32 S3 embedded SoC, which includes WiFi 802.11 b/g/n, and Nordic nRF52832 SoC for Bluetooth LE scan and connection. It is able to scan for any Bluetooth LE advertising packet, including main beacon technologies, iBeacon and Eddystone. Both HTTP and MQTT protocols are available for network communication.
TinyGateway WiFi Outdoor BLE is provided in a compact robust waterproof PC enclosure with IP65 rating.
Power-supply is provided through internal 2-port connector, accessible via cable-gland, with voltage range 4.5V to 30VDC.

Key features
Low-power Bluetooth Low Energy gateway with WiFi connectivity
Supported Bluetooth LE stack: 4.x and 5.x
Operating modes: BLE central
Network interface: Wireless LAN
Support of the following set of connection protocols: UDP, TCP, HTTP, MQTT
Multiple data encoding options: JSON, ASCII, raw-data
Easy-to-use web UI manager dashboard for configuration and management
Complete remote configurability via HTTP or MQTT API
Possibility to operate simultaneously in scanning-mode (BLE receiver) and advertising-mode (BLE beacon)
Hardware
Platform: Espressif Systems ESP32S3WROOM1-1
Processor: ESP32-S3 series, Xtensa® dual-core 32-bit LX7 microprocessor, up to 240MHz
Memory: 384 KB ROM, 512 KB SRAM, Up to 8 MB PSRAM
Connectivity: WiFi (802.11), Bluetooth Low Energy
User interfaces: Power-on LED, Bluetooth LE LED, WiFi RGB LED, factory-reset button
WiFi specifications
Core module: Espressif Systems ESP32-S3
Protocol: IEEE 802.11 b/g/n
Frequency band: 2.412 to 2.484 GHz
Channel spacing: 20 MHz (802.11 b/g/n), 40MHz (802.11n)
Sensitivity: -98 dBm (802.11b, 1 Mbps)
TX Power: 20.5dBm (max., 802.11b, 1 Mbps)
Antenna type: Meander Planar Inverted F-antenna
Antenna gain: 0dBi
Bluetooth Low Energy specifications
Core module: Nordic Semiconductor nRF52832 SoC, 32-bit ARM Cortex-M4
Protocol: Bluetooth Low Energy (v4.x/5.x)
Frequency band: 2.402 to 2.480 GHz
Channel spacing: 2 MHz
Sensitivity: -96 dBm
TX power: 4dBm (max.)
Antenna type: Planar Inverted F-antenna
Antenna gain: 2dBi
Power supply
Power voltage: 4.5 to 30 Vdc (internal 2-port)
Power connector: Internal 2-port: pluggable connector, Würth series 301/3157 compatible. Cable-gland for cable entry
Current: 100 mA @12Vdc (max., with 802.11b, 1 Mbps, @20.5 dBm)
Mechanical specifications
Material: Polycarbonate (PC) plastic
Color: Light gray
Size: 105 x 105 x 45 mm (excluding flanges)
Weight: 200 gr
Protection: IP65
Assembly: Lid with screw lock (4 screws included)
Mounting options: Screws for rear flanges
Environmental specifications
Operating temperature: -40°C to +65°C
Storage temperature: -40°C to +105°C



Other version

NEW

TinyGateway WiFi BLE

NEW

TinyGateway PoE BLE

NEW

TinyGateway PoE Outdoor BLE



iBeacon technology creates a small area of detection for Bluetooth 4.0 enabled mobile devices. Bluetooth LE devices use iBeacon licensed technology, and have been certified by BlueUp to meet Apple Proximity Beacon Specifications

Eddystone is a protocol specification that defines Bluetooth LE formats for proximity beacon advertising, with different frame types that may be used individually or in combinations. The BlueUp beacons have been certified by Google in accordance with the requirements of the Eddystone specifications.