NEW

TinySensor

TinySensor is an IoT sensor device that can be provided in three different versions, with different wireless connectivity technologies:
TinySensor WiFi (WiFi IEEE 802.11b/g/n)
TinySensor Bluetooth LE (Bluetooth Low Energy)
TinySensor Wirepas (Wirepas Mesh 2.4GHz)
TinySensor is based on same hardware platform of TinyGateway: ESP32 S3 embedded SoC for WiFi 802.11 b/g/n support, Nordic Semiconductors nRF52832 SoC for Bluetooth LE or Wirepas Mesh 2.4GHz support.
TinySensor board integrates a socket designed according to specifications of MikroBUS™ standard, which allows to customize it with an add-on sensor board from the MikroE Click boards catalogue or from a custom design. TinySensor can be a temperature and humidity sensor, an air quality sensor, a gas sensor, and more. It can also be used as development board to accelerate IoT projects.

Key features
Three versions: TinySensor WiFi (WiFi IEEE 802.11), TinySensor Bluetooth LE, TinySensor Wirepas (Wirepas Mesh 2.4GHz)
Based on ESP32 S3 for WiFi and nRF52832 for Bluetooth LE and Wirepas Wirepas Mesh 2.4GHz
Compatibility with sensors from MikroE Click board cataloge: integrates one socket designed according to specifications of MikroBUS™ standard
Default configuration with vented plastic enclosure for indoor installation. Alternative configurations: outdoor (rugged IP65 enclosure), OEM (single board)
Dual power supply: 5VDC USB (lateral USB-C connector) or 4.5-30VDC (internal 2-port connector, with rear knockout on back panel of enclosure for cable entry)
Hardware
Platform: Espressif Systems ESP32S3WROOM1-1 with Nordic Semiconductors nRF52832
Main Processor: ESP32-S3 series, Xtensa® dual-core 32-bit LX7 microprocessor, up to 240MHz, support for WiFi (802.11)
Sensor processor: Nordic Semiconductors nRF52832, Arm® Cortex™-M4 processor, 64MHz, support for Bluetooth Low Energy (up to 5.3) or Wirepas Mesh 2.4GHz (up to 5.3)
Sensors: any kind of sensor with interface compatible with MikroBUS™ standard
User interfaces: Power-on LED, Bluetooth LE/Wirepas LED, WiFi LED, factory-reset button
TinySensor WiFi specifications
Core module: Espressif Systems ESP32-S3
Protocol: IEEE 802.11 b/g/n
Frequency band: 2.412 to 2.484 GHz
Channel spacing: 20 MHz (802.11 b/g/n), 40MHz (802.11n)
Sensitivity: -98 dBm (802.11b, 1 Mbps)
TX Power: 20.5dBm (max., 802.11b, 1 Mbps)
Antenna type: Meander Planar Inverted F-antenna
Antenna gain: 0dBi
TinySensor Bluetooth LE specifications
Core module: Nordic Semiconductor nRF52832 SoC, 32-bit ARM Cortex-M4
Protocol: Bluetooth Low Energy v4.0/5.0 (up to 5.3)
Frequency band: 2.402 to 2.480 GHz
Channel spacing: 2 MHz
Sensitivity: -96 dBm
TX power: 4dBm (max.)
Antenna type: Planar Inverted F-antenna
Antenna gain: 2dBi
TinySensor Wirepas specifications
Core module: Nordic Semiconductor nRF52832 SoC, 32-bit ARM Cortex-M4
Protocol: Wirepas Mesh 2.4GHz, v5.x (up to 5.3)
Frequency band: 2.402 to 2.480 GHz
Channel spacing: 2 MHz
Sensitivity: -96 dBm
TX power: 4dBm (max.)
Antenna type: Planar Inverted F-antenna
Antenna gain: 2dBi
Sensors
Interface: compatible with MikroBUS™ standard
Available sensors: select from MikroE Click boards catalogue or request custom design
Power supply
Power voltage: (a) 5 Vdc (USB); (b) 4.5 to 30 Vdc (internal 2-port)
Power connector: (a) USB: USB-C connector; (b) Internal 2-port: pluggable connector, Würth series 301/3157 compatible. Rear knockout for cable entry (20mm diameter)
Current: depends on version (WiFi, Bluetooth LE, Wirepas) and on sensor type and configuration
Mechanical specifications
Material: Recyclable ABS plastic (flame-resistant)
Color: White
Size: 74 x 74 x 25.5 mm
Weight: 50 gr
Protection: - (vented enclosure)
Assembly: Front and back clip together construction
Mounting options: Dual-adhesive or screws
Environmental specifications
Operating temperature: -40°C to +65°C
Storage temperature: -40°C to +105°C



Available configurations

Indoor

Outdoor

OEM


Customization services



Logo
Devices are supplied in a "white-label" enclosure: custom silk-screen or digital printing available on demand

Configuration
Possibility of supplying beacons with pre-configured parameters to customer specifications

Firmware
Implementation and integration of custom features and functionalities