Quuppa Brick, based on nRF52832 BLE SoC, is high-end long-life industrial rugged outdoor wireless tag with full support of Quuppa Intelligent Locating System.
It uses native Quuppa libraries, ensuring full support of the Quuppa RTLS software features, including back-channel for configuration and commands, OTA FW update, proprietary channels.
Quuppa Brick is suitable as asset tag for locating and tracking forklifts, vehicles, containers, pallets. Typical applications are vehicle-to-vehicle and vehicle-to-person collision-avoidance and warehouse tracking.
It includes a 3-axis accelerometer for motion, shock and free-fall detection.
Quuppa Brick has a rugged IP67/NEMA6 enclosure and is powered by a replaceable lithium thionyl chloride battery-pack ER14505 1S2P with more than 5Ah capacity and
extended operating temperature range. It is available in an enclosure with or without flanges.
Firmware based on native Quuppa libraries (Quuppa Compatible)
Supports back-channel communication for configuration and triggering actions on tag, proprietary channels, OTA FW upgrade
Configuration options: configurable with Quuppa Site Planner
TX power: -40, -20 to 4 dBm (with 4 dB steps)
Advertising channels: BLE (2402, 2426, 2480 MHz) or Quuppa proprietary (2401, 2403, 2481 MHz)
Advertising interval: 0.1 to 10 secs (BLE channel); 0.02 to 10 secs (Quuppa proprietary channel)
Quuppa ID: MAC address or custom ID
Version: Quuppa Intelligent Locating System protocol, Bluetooth Low Energy (advertising-only)
Frequency: 2.401 to 2.481 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Model: battery-pack 2x ER14505 (5200 mAh typ. capacity at 25°C)
Expected life: 2.5 years (33 Hz) to 20 years (0.1 Hz) at 0 dBm, 24/7 at ambient temperature
Operating temperature: -40°C to +75°C
Sensors and interfaces
Sensors: 3-axis linear accelerometer
Color: ligth grey (RAL 7035)
Size: 64 x 58 x 35 mm (version w/o flanges), 94 x 58 x 35 mm (version w/ flanges)