Wirepas Card is a badge-like battery-powered mobile tag, based on new-generation chip Nordic nRF52832, with full support of Wirepas Mesh 2.4GHz network protocol.
Thanks to its ultra-slim form-factor, Wirepas Card can be worn as an identification badge for personnel or hung on racks or products.
Push-button and internal accelerometer (for motion, shock and free-fall detection) allow to enable worker-safety functionalities.
Wirepas Card is waterproof and powered by a thin non-replaceable lithium battery that guarantees a long operating life. Additionally, it can integrate an optional NFC NTAG2 tag.
Software: Wirepas Mesh 2.4GHz v5.x
Operating modes: Non-router mode - Mobile tag (periodic or on-event transmission of identifier and location)
Configuration and diagnostics: Wirepas Network Tool application
Mobile tag operating states: default, motion, alarm (button, free-fall, man-down), sleep
Positioning interval: 15 secs to 18 hours (configurable for each state)
Positioning state-timeout: 15 secs to 18 hours (configurable for each state)
Beaconing: configurable (disable, iBeacon, Safety, Quuppa Emulation Mode)
Beaconing interval: 100 msec to 1 hour (configurable for each state)
Beaconing power: -40, -20 to 4 dBm with 4 dB steps (configurable for each state)
Version: Wirepas Mesh 2.4GHz, Bluetooth Low Energy (advertising-only)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Antenna gain: 2dB (average)
Antenna pattern: omnidirectional
Model: CP224147 (800 mAh typ. capacity at 25°C)
Expected life: 28 months at 5 minutes interval, 13.5 years at 6 hours interval (24/7 at ambient temperature)
Operating temperature: -20°C to +60°C
Sensors and interfaces
Accelerometer: 3-axis linear accelerometer
Leds: 2 (green, orange)
Material: ABS plastic
Color: white (your logo silk-screen printing are available on demand; optional colors available)
Size: 85 x 56 x 4.4 mm
Weight: 15 gr
Fastening: hole for lanyard/ring
Wirepas Mesh is a wireless network protocol that uses a multi-hop, self-organizing, and decentralized design.
Decentralized network topology enables extremely dense network deployment. Wirepas Mesh is used for indoor localization MeshIPS platform with cable-less infrastructure: all devices (mobile tags and anchors) are