Slim Tag Wirepas

Slim Tag Wirepas is a battery-powered mobile tag, based on nRF52832 SoC, with full support of Wirepas Mesh 2.4GHz features.
Slim Tag Wirepas can be used as an identification tag for assets. By using the internal accelerometer, it can be configured to automatically enter into low-power mode for battery savings.
Slim Tag Wirepas uses a couple of CR2032 coin batteries that are easily replaceable by simply removing the back cover fixed by 4 screws.

General features
Software: Wirepas Mesh 2.4GHz v5.x
Operating modes: Non-router mode - Mobile tag (periodic or on-event transmission of identifier and location)
Configuration and diagnostics: Wirepas Network Tool, Wirepas gateway APIs, MeshCube APIs
Mobile tag operating states: default, motion, alarm (button, free-fall, man-down), sleep
Positioning interval: 15 secs to 18 hours (configurable for each state)
Positioning state-timeout: 15 secs to 18 hours (configurable for each state)
Beaconing: configurable (disable, iBeacon, Safety, Quuppa Emulation Mode)
Beaconing interval: 100 msec to 1 hour (configurable for each state)
Beaconing power: -40, -20 to 4 dBm with 4 dB steps (configurable for each state)
Radio
Version: Wirepas Mesh 2.4GHz, Bluetooth Low Energy (advertising-only)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Antenna gain: 2 dB (average)
Antenna pattern: omnidirectional
Battery
Replaceable: Yes
Model: 2x Panasonic CR2032 (450 mAh typ. capacity at 25°C)
Expected life: 15 months at 5 minutes interval, 7.5 years at 6 hours interval (24/7 at ambient temperature)
Operating temperature: -20°C to +60°C
Sensors
Accelerometer: 3-axis linear accelerometer
Enclosure
Material: ABS plastic
Color: white
Size: 63 x 30 x 8 mm
Weight: 17 gr
Fastening: double-sided tape, slots for clamps/screws
Protection: IP40
Certifications
CE (EU), FCC (US)



Wirepas Mesh is a wireless network protocol that uses a multi-hop, self-organizing, and decentralized design. Decentralized network topology enables extremely dense network deployment. Wirepas Mesh protocol is used for indoor localization MeshCube platform with cable-less infrastructure: all devices (mobile tags and anchors) are battery operated.