Wirepas Ultra Plus

Wirepas Ultra Plus is equipped with temperature and humidity sensors.
Wirepas Ultra Plus is an indoor anchor tag, based on nRF52832 chipset, with full support of Wirepas Mesh 2.4GHz features.
Wirepas Ultra Plus has innovative features for the market: directive antenna with circulaly-polarized polarization, two power options (4x AA alkaline batteries and external USB power supply). It is the optimal solution as fixed mesh anchor for indoor positioning and tracking (directive antenna reduces multipath and increase accuracy for room/floor detection).

General features
Software: Wirepas Mesh 2.4GHz v5.x
Operating modes: Router mode (anchor tag): mesh network node
Configuration and diagnostics: Wirepas Network Tool application
Beaconing: configurable (disable, iBeacon, Safety, Quuppa Emulation Mode)
Beaconing interval: 100 msec to 1 hour (configurable for each state)
Beaconing power: -40, -20 to 4 dBm with 4 dB steps (configurable for each state)
Radio
Version: Wirepas Mesh 2.4GHz, Bluetooth Low Energy (advertising-only)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antennas: 2 switchable (printed circularly-polarized directive antenna, meandered planar F-antenna)
Power
Type: battery and USB
USB: microUSB connector, 5VDC
Battery: 4xAA LR6 alkaline (5600 mAh typ. capacity at 25°C)
Replaceable: Yes
Expected life: 2.4 to 12 years in Anchor Mode, 24/7 at ambient temperature (battery-only)
Operating temperature: -20°C to +60°C
Sensors and interfaces
Sensors: temperature, humidity, button
Temperature: ±0.2°C (0 to 70°C), ±0.3°C (-40 to 100°C)
Humidity: 3%RH (RH=0 to 85%RH), 4%RH (RH=85 to 95%RH)
LED: 1 (red)
Enclosure
Material: ABS
Color: white
Size: 100 x 100 x 35 mm (excluding flange), 124 x 100 x 35 mm (including flange)
Weight: 197 gr (including flange)
Protection: IP20
Certifications
CE (EU)

Find out the Deluxe version

Wirepas Ultra Deluxe




Wirepas Mesh is a wireless network protocol that uses a multi-hop, self-organizing, and decentralized design. Decentralized network topology enables extremely dense network deployment. Wirepas Mesh protocol is used for indoor localization MeshIPS platform with cable-less infrastructure: all devices (mobile tags and anchors) are battery operated.