Wirepas Mesh 2.4GHz

bt_bb_section_bottom_section_coverage_image

Ultra Zero Wirepas

Discover all the features:
Anchor

Ultra Zero Wirepas is suitable for indoor localization and tracking.

Main features

-Based on Nordic nRF52832
-Firmware based on Wirepas libraries

Battery powered

Ultra Zero Wirepas is powered by 4x alkaline batteries.
The batteries are easily replaceable.

Other characteristics

-Directive antenna for higher accuracy
-Enclosure suitable for wall/ceiling installation
-EN60601-1-2 (EMC for medical equipments) certification

Ultra Zero Wirepas has been used in the following use cases ⮟

ATLAS Project

https://www.blueupbeacons.com/wp-content/uploads/2024/10/atlas-sanita-healthcare-1.png
Technology
https://www.blueupbeacons.com/wp-content/uploads/2024/09/wirepas-products-1.png

Wirepas Mesh is a wireless network protocol that uses a multi-hop, self-organizing, and decentralized design. Decentralized network topology enables extremely dense network deployment. Wirepas Mesh protocol is used for indoor localization MeshCube platform with cable-less infrastructure: all devices (mobile tags and anchors) are battery operated.

General features

Software: Wirepas Mesh 2.4GHz v5.x
Operating modes: Router mode (anchor tag): mesh network node
Configuration and diagnostics: Wirepas Network Tool, Wirepas gateway APIs, MeshCube APIs
Beaconing: configurable (disable, iBeacon, Safety, Quuppa Emulation Mode)
Beaconing interval: 100 msec to 1 hour (configurable for each state)
Beaconing power: -40, -20 to 4 dBm with 4 dB steps (configurable for each state)

Radio

Version: Wirepas Mesh 2.4GHz, Bluetooth Low Energy (advertising-only)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed circularly-polarized 3dBc directive antenna

Battery

Type: battery
Battery: 4xAA LR6 alkaline (5600 mAh typ. capacity at 25°C)
Replaceable: Yes
Expected life: 2.4 to 12 years in Anchor Mode, 24/7 at ambient temperature (battery-only)
Operating temperature: -20°C to +60°C

Enclosure

Material: ABS
Color: white
Size: 100 x 100 x 35 mm (excluding flange), 124 x 100 x 35 mm (including flange)
Weight: 197 gr (including flange)
Protection: IP40

Certifications

CE (EU)
EN60601-1-2 (EMC for medical equipments)

Accessories
https://www.blueupbeacons.com/wp-content/uploads/2024/09/ultra-holder-1.png
Ultra holder

Customization services

Logo

Devices are supplied in a “white-label” enclosure: custom silk-screen or digital printing available on demand.

Configuration

Possibility of supplying beacons with pre-configured parameters to customer specifications.

Firmware

Implementation and integration of custom features and functionalities.