Badge-Holder is a wearable battery-powered Bluetooth Low Energy tag, based on new-generation Bluetooth LE chip Nordic nRF52832, with a badge-holder case able host standard ISO/IEC 7810 cards (magnetic, RFID, NFC). It simultaneously supports multiple technologies: iBeacon, Eddystone (full support, with GATT and EID), Quuppa (emulation mode). It also supports proprietary Safety packet.
Badge-Holder is designed for personnel identification and tracking. Push-button and internal accelerometer (for motion, shock and free-fall detection) allows to enable worker-safety functionalities.
Badge-Holder is waterproof and powered by a thin non-replaceable lithium battery that guarantees a long operating life.

8 slots configurable for non-connectable advertising frames:
- 4 slots, each configurable for Eddystone frame types: UID, URL, TLM or EID. Full support for specifications Eddystone Configuration GATT Service by Google
- 4 slots, each configurable for the following frame types: iBeacon, Quuppa (Direction Finding packet)
Advertising interval (independently configurable for each slot): 0.1 to 60 secs
TX power (independently configurable for each slot): -40 dBm, -20dBm to 4 dBm (with 4dB steps)
Additional configuration options: non-connectable mode, anonymous mode, programmable time period, orientation/motion-detection mode, locked/unlocked mode, change password
Support for Safety packet: beacon ID, battery status, motion detection, button-press (short/long), man-down detection
Configurable with BlueBeacon Manager App for Android and iOS
Version: Bluetooth 4.2, Low Energy (Bluetooth5-ready)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Replaceable: No
Model: CP224147 (800 mAh typ. capacity at 25°C)
Expected life: 7 months to 15 years, 24/7 at ambient temperature (depending on configuration); 2.8 years with default settings;
Enabling Accelerometer-based Modes can significantly increase battery life
Operating temperature: -20°C to +60°C
Sensors and interfaces
Accelerometer: 3-axis linear accelerometer
Button: user configurable (via GATT)
Leds: 2 (green, orange) controllable (via GATT)
Material: ABS plastic
Color: white
Size: 95 x 64 x 7 mm
Weight: 24 gr
Fastening: 2x holes for lanyard/ring/badge-clip (horizontal and vertical)
Host card: ISO/IEC7810 ID-1 (85,6 x 54 x 0.76 mm)
Protection: IP67
CE (EU), FCC (US, pending)

iBeacon technology creates a small area of detection for Bluetooth 4.0 enabled mobile devices. Bluetooth LE devices use iBeacon licensed technology, and have been certified by BlueUp to meet Apple Proximity Beacon Specifications

Eddystone is a protocol specification that defines Bluetooth LE formats for proximity beacon advertising, with different frame types that may be used individually or in combinations. The BlueUp beacons have been certified by Google in accordance with the requirements of the Eddystone specifications.