NEW

Quuppa Badge-Holder

Quuppa Badge-Holder, based on nRF52832 BLE SoC, is a wearable battery-powered wireless tag with full support of Quuppa Intelligent Locating System. It uses native Quuppa libraries, ensuring full support of the Quuppa RTLS software features, including back-channel for configuration and commands, OTA FW update, proprietary channels. Quuppa Badge Holder is a tag with a badge-holder case able to host standard ISO/IEC 7810 cards (magnetic, RFID, NFC).
Quuppa Badge-Holder is designed for personnel identification and tracking. Push-button and internal accelerometer (for motion, shock and free-fall detection) allow to enable worker-safety functionalities.
Quuppa Badge-Holder is waterproof and powered by a thin non-replaceable lithium battery that guarantees a long operating life.

General features
Firmware based on native Quuppa libraries (Quuppa Compatible)
Tested for software, hardware, and mechanics by Quuppa (Quuppa Approved)
Supports back-channel communication for configuration and triggering actions on tag, proprietary channels, OTA FW upgrade
Configuration options: configurable with Quuppa Site Planner
TX power: -40, -20 to 4 dBm (with 4 dB steps)
Advertising channels: BLE (2402, 2426, 2480 MHz) or Quuppa proprietary (2401, 2403, 2481 MHz)
Advertising interval: 0.1 to 10 secs (BLE channel); 0.02 to 10 secs (Quuppa proprietary channel)
Quuppa ID: MAC address or custom ID
Radio
Version: Quuppa Intelligent Locating System protocol, Bluetooth Low Energy (advertising-only)
Frequency: 2.401 to 2.481 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Antenna gain: 2 dB (average)
Antenna pattern: omnidirectional
Battery
Replaceable: No
Model: CP224147 (800 mAh typ. capacity at 25°C)
Expected life: 2 month (33 Hz) to 15 years (0.1 Hz) at 0 dBm, 24/7 at ambient temperature
Operating temperature: -20°C to +60°C
Sensors and interfaces
Accelerometer: 3-axis linear accelerometer
Button: user configurable
Led: 2 (green, orange)
Enclosure
Material: ABS plastic
Color: white
Size: 95 x 64 x 7 mm
Fastening: 2x holes for lanyard/ring/badge-clip (horizontal and vertical)
Host card: ISO/IEC7810 ID-1 (85,6 x 54 x 0.76 mm) Protection: IP67
Certifications
CE (EU), FCC (US, pending) [2.481 GHz not available for FCC]