Brick Wirepas

Brick Wirepas is high-end long-life industrial rugged outdoor anchor tag, that can be also used as mobile tag, based on nRF52832 chipset with full support of Wirepas Mesh 2.4GHz network protocol. It is ideal as anchor due to its extremely long battery operating life.
Brick Wirepas is perfectly suitable for all installations where protection from environmental factors and long operating life are critical parameters. Typical scenarios are logistics, outdoor installations, industrial plants, automotive.
Brick Wirepas has a rugged IP67/NEMA6 enclosure, includes an accelerometer and is powered by a replaceable lithium thionyl chloride battery pack ER14505 1S2P with more than 5Ah capacity and extended operating temperature range.

General features
Software: Wirepas Mesh 2.4GHz v5.x
Operating modes: Non-router mode (mobile tag): periodic transmission of identifier for positioning); Router mode (anchor tag): mesh network node
Configuration and diagnostics: Wirepas Network Tool application
Mobile tag operating states: default, motion, alarm (button, free-fall, man-down), sleep
Positioning interval: 15 secs to 18 hours (configurable for each state)
Positioning state-timeout: 15 secs to 18 hours (configurable for each state)
Beaconing: configurable (disable, iBeacon, Safety, Quuppa Emulation Mode)
Beaconing interval: 100 msec to 1 hour (configurable for each state)
Beaconing power: -40, -20 to 4 dBm with 4 dB steps (configurable for each state)
Radio
Version: Wirepas Mesh 2.4GHz, Bluetooth Low Energy (advertising-only)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Battery
Replaceable: Yes
Model: 2x AA 3.6V Lithium Thionyl Chloride LiSoCl2 (5200 mAh typ. capacity at 25°C)
Expected life: 2.5 to 14.5 years in Anchor Mode, 12.5 years (5 minutes interval) to 20 years (1 hour interval) in Mobile Tag Mode, 24/7 at ambient temperature
Operating temperature: -40°C to +75°C
Sensors and interfaces
Sensors: 3-axis linear accelerometer
Enclosure
Material: polycarbonate
Color: ligth grey (RAL 7035)
Size: 64 x 58 x 35 mm (version w/o flanges), 94 x 58 x 35 mm (version w/ flanges)
Weight: 94 gr (version w/o flanges), 108 gr (version w/ flanges)
Protection: IP67/NEMA6
Certifications
CE (EU)

Available options

WF (with flanges)

NF (without flanges)





Wirepas Mesh is a wireless network protocol that uses a multi-hop, self-organizing, and decentralized design. Decentralized network topology enables extremely dense network deployment. Wirepas Mesh protocol is used for indoor localization MeshIPS platform with cable-less infrastructure: all devices (mobile tags and anchors) are battery operated.