Forte+ LED

Wirepas asset tag

• Suitable for outdoor and industrial applications
• Based on Nordic nRF52832
• Firmware based on Wirepas libraries
• 3-axis accelerometer for motion detection
• High-visibility RGB LED
• Rugged IP67 enclosure
• Powered by replaceable CR123A lithium battery



General features
Software: Wirepas Mesh 2.4GHz v5.x
Operating modes: Non-router mode (mobile tag): periodic transmission of identifier for positioning); Router mode (anchor tag): mesh network node
Configuration and diagnostics: Wirepas Network Tool, Wirepas gateway APIs, MeshCube APIs
Mobile tag operating states: default, motion, alarm (button, free-fall, man-down), sleep
Positioning interval: 15 secs to 18 hours (configurable for each state)
Positioning state-timeout: 15 secs to 18 hours (configurable for each state)
Beaconing: configurable (disable, iBeacon, Safety, Quuppa Emulation Mode)
Beaconing interval: 100 msec to 1 hour (configurable for each state)
Beaconing power: -40, -20 to 4 dBm with 4 dB steps (configurable for each state)
Radio
Version: Wirepas Mesh 2.4GHz, Bluetooth Low Energy (advertising-only)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Battery
Replaceable: Yes
Model: CR123A (1500 mAh typ. capacity at 25°C)
Expected life: 0.8 to 5.2 years in Anchor Mode, 4 years (5 minutes interval) to 15 years (1 hour interval) in Mobile Tag Mode, 24/7 at ambient temperature
Operating temperature: -30°C to +75°C
Sensors and interfaces
Sensors: 3-axis linear accelerometer; optional sensor board (temperature, light, ...)
LED: 1 (RGB, high-visibility)
Enclosure
Material: polycarbonate
Color: ligth grey (RAL 7035)
Size: 52 x 50 x 35 mm (version w/o flange), 52 x 80 x 35 mm (version w/ flanges)
Weight: 60 gr (version w/o flange), 67 gr (version w/ flanges)
Protection: IP67/NEMA6
Certifications
CE (EU)

Other version

STD/WF (with flanges)


Available options

STD/NF (without flanges)

LED/NF (without flanges)




Wirepas Mesh is a wireless network protocol that uses a multi-hop, self-organizing, and decentralized design. Decentralized network topology enables extremely dense network deployment. Wirepas Mesh protocol is used for indoor localization MeshCube platform with cable-less infrastructure: all devices (mobile tags and anchors) are battery operated.

Customization services



Logo
Devices are supplied in a "white-label" enclosure: custom silk-screen or digital printing available on demand

Configuration
Possibility of supplying beacons with pre-configured parameters to customer specifications

Firmware
Implementation and integration of custom features and functionalities