Quuppa SafeX, based on nRF52832 Bluetooth LE SoC, is a wearable battery-powered wireless tag with full support of Quuppa Intelligent Locating System.
It uses native Quuppa libraries, ensuring full support of the Quuppa RTLS software features, including back-channel for configuration and commands, OTA FW update, proprietary channels.
Quuppa SafeX is designed for industrial and safety applications: robust case, replaceable long-life coin CR2477 battery, alarm button, 2 LED, buzzer, vibration motor.
Alarms on SafeX Lite can be triggered using QPE APIs. It includes a 3-axis accelerometer for motion, shock and free-fall detection.
Quuppa SafeX is provided in a waterproof IP65 enclosure, with three wearability options: SafeClip (clip for belt/pocket), SafeCord (eyelet for lanyard), SafeBand (silicone wrist-strap).
Firmware based on native Quuppa libraries (Quuppa Compatible)
Tested for software, hardware, and mechanics by Quuppa (Quuppa Approved)
Supports back-channel communication for configuration and triggering actions on tag, proprietary channels, OTA FW upgrade
Configuration options: configurable with Quuppa Site Planner
TX power: -40, -20 to 4 dBm (with 4 dB steps)
Advertising channels: Bluetooth LE (2402, 2426, 2480 MHz) or Quuppa proprietary (2401, 2403, 2481 MHz)
Advertising interval: 0.1 to 10 secs (Bluetooth LE channel); 0.02 to 10 secs (Quuppa proprietary channel)
Quuppa ID: MAC address or custom ID
Version: Quuppa Intelligent Locating System protocol, Bluetooth Low Energy (advertising-only)
Frequency: 2.401 to 2.481 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Model: 1x CR2477 (1000 mAh typ. capacity at 25°C)
Expected life: 3 month (33 Hz) to 15 years (0.1 Hz) at 0 dBm, 24/7 at ambient temperature
Operating temperature: -20°C to +60°C
Sensors and interfaces
Sensors: 3-axis linear accelerometer
User interfaces: button, 2 LED (red, yellow), buzzer, vibration motor
Material: ASA plastic
Size: 55 x 46 x 17 mm
Weight: 23 gr (without accessories)
Fastening: clip for belt/pocket (SafeClip), eyelet for lanyard (SafeCord) silicone wriststrap (SafeBand)
BlueBeacon Quuppa SafeX has firmware based on Quuppa native libraries (Quuppa Compatible). Quuppa Compatible tags have native support for all Quuppa software features,
including back-channel for commanding and configuration, OTA FW upgrading, Quuppa proprietary channels.
BlueBeacon Quuppa SafeX have been certified by Quuppa as "Quuppa Approved". The Quuppa Approved marking is granted to Quuppa Compatible tags after they have passed Quuppa testing program to ensure
they meet the high-quality standards for software, hardware, and mechanics.