SafeX Wirepas is a wearable battery-powered mobile tag based on nRF52832 SoC, with full support of Wirepas Mesh 2.4GHz network protocol.
SafeX Wirepas is designed for industrial and safety applications: robust case, replaceable long-life coin CR2477 battery, alarm button, 2 LED, buzzer, vibration motor.
It is provided in a waterproof IP65 enclosure, with three wearability options: SafeClip (clip for belt/pocket), SafeCord (eyelet for lanyard), SafeBand (silicone wrist-strap).
Software: Wirepas Mesh 2.4GHz v5.x
Operating modes: Non-router mode - Mobile tag (periodic or on-event transmission of identifier and location)
Configuration and diagnostics: Wirepas Network Tool, Wirepas gateway APIs, MeshCube APIs
Mobile tag operating states: default, motion, alarm (button, free-fall, man-down), sleep
Positioning interval: 15 secs to 18 hours (configurable for each state)
Positioning state-timeout: 15 secs to 18 hours (configurable for each state)
Beaconing: configurable (disable, iBeacon, Safety, Quuppa Emulation Mode)
Beaconing interval: 100 msec to 1 hour (configurable for each state)
Beaconing power: -40, -20 to 4 dBm with 4 dB steps (configurable for each state)
Version: Wirepas Mesh 2.4GHz, Bluetooth Low Energy (advertising-only)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Model: 1x CR2477 (1000 mAh typ. capacity at 25°C)
Expected life: 2.7 years at 5 minutes interval, 15 years at 6 hours interval (24/7 at ambient temperature)
Operating temperature: -20°C to +60°C
Sensors and interfaces
Sensors: 3-axis linear accelerometer
User interfaces: button, 2 LED (red, yellow), buzzer, vibration motor
Material: ASA plastic
Size: 55 x 46 x 17 mm
Weight: 23 gr (without accessories)
Fastening: clip for belt/pocket (SafeClip), eyelet for lanyard (SafeCord) silicone wriststrap (SafeBand)
Wirepas Mesh is a wireless network protocol that uses a multi-hop, self-organizing, and decentralized design.
Decentralized network topology enables extremely dense network deployment. Wirepas Mesh protocol is used for indoor localization MeshIPS platform
with cable-less infrastructure: all devices (mobile tags and anchors) are