NEW

TagX SHT Wirepas

Wirepas sensor

• Suitable for indoor applications
• Based on Nordic nRF52832
• Firmware based on Wirepas libraries
• 3-axis accelerometer for motion detection
• Temperature and Humidity sensors
• 2x high-visibility LEDs
• Enclosure with flanges for flexible fastening
• Powered by replaceable CR2477 lithium battery



General features
Software: Wirepas Mesh 2.4GHz v5.x
Operating modes: Non-router mode - Mobile tag (periodic or on-event transmission of identifier and location)
Configuration and diagnostics: Wirepas Network Tool, Wirepas gateway APIs, MeshCube APIs
Mobile tag operating states: default, motion, alarm (button, free-fall, man-down), sleep
Positioning interval: 15 secs to 18 hours (configurable for each state)
Positioning state-timeout: 15 secs to 18 hours (configurable for each state)
Beaconing: configurable (disable, iBeacon, Safety, Quuppa Emulation Mode)
Beaconing interval: 100 msec to 1 hour (configurable for each state)
Beaconing power: -40, -20 to 4 dBm with 4 dB steps (configurable for each state)
Radio
Version: Wirepas Mesh 2.4GHz, Bluetooth Low Energy (advertising-only)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Battery
Replaceable: Yes
Model: 1x CR2477 (1000 mAh typ. capacity at 25°C)
Expected life: 2.7 years at 5 minutes interval, 15 years at 6 hours interval (24/7 at ambient temperature)
Operating temperature: -20°C to +60°C
Sensors and interfaces
Sensors: 3-axis linear accelerometer, temperature, humidity
User interfaces: 2 LEDs (red, yellow)
Enclosure
Material: ABS plastic
Color: white
Size: 75 x 46 x 16 mm (including flanges)
Weight: 27 gr (including flanges)
Fastening: flanges for screws or plastic ties, biadhesive
Protection: -
Certifications
CE (EU)



Other versions

NEW: IP67

TagX

NEW

TagX LED

NEW

TagX BUT



Wirepas Mesh is a wireless network protocol that uses a multi-hop, self-organizing, and decentralized design. Decentralized network topology enables extremely dense network deployment. Wirepas Mesh protocol is used for indoor localization MeshCube platform with cable-less infrastructure: all devices (mobile tags and anchors) are battery operated.

Customization services



Logo
Devices are supplied in a "white-label" enclosure: custom silk-screen or digital printing available on demand

Configuration
Possibility of supplying beacons with pre-configured parameters to customer specifications

Firmware
Implementation and integration of custom features and functionalities