TinyGateway PoE Outdoor BLE
TinyGateway PoE Outdoor BLE is a rugged outdoor low-power and low-cost Bluetooth LE gateway, with Ethernet PoE connectivity.
TinyGateway PoE Outdoor BLE is based on ESP32-S3, integrated with peripheral for Ethernet connectivity and 802.3af support,
and Nordic nRF52832 SoC for Bluetooth LE communication. It is able to scan for any Bluetooth LE advertising packet, including main beacon technologies.
The available protocols for network communication are UDP, TCP, HTTP(S), MQTT(S).
TinyGateway PoE Outdoor BLE is provided in a compact robust UV-protected PS enclosure with IP65 rating.
Power-supply is provided through a waterproof RJ45 PoE connector.
Key featuresOutdoor rugged low-power Bluetooth Low Energy gateway with Ethernet (PoE) connectivity
Supported Bluetooth LE stack: 4.x and 5.x
Operating modes: Bluetooth LE central
Network interface: Ethernet PoE 802.3af
Support of the following set of connection protocols: UDP, TCP, HTTP, MQTT
Multiple data encoding options: JSON, ASCII, raw-data
Easy-to-use web UI manager dashboard for configuration and management
Complete remote configurability via HTTP or MQTT API
Possibility to operate simultaneously in scanning mode (BLE receiver) and advertising mode (BLE beacon)
HardwarePlatform: Espressif Systems ESP32S3WROOM-1
Processor: ESP32-S3 series, Xtensa® dual-core 32-bit LX7 microprocessor, up to 240MHz
Memory: 384 KB ROM, 512 KB SRAM, Up to 8 MB PSRAM
Connectivity: Ethernet (802.11), Bluetooth Low Energy (v4.x / 5.x)
User interfaces: Power-on LED, Bluetooth LE LED, Status LED, factory-reset button (internal)
Ethernet specificationsProtocol: IEEE 802.3af (PoE)
Bluetooth Low Energy specificationsCore module: Nordic Semiconductor nRF52832 SoC, 32-bit ARM Cortex-M4
Protocol: Bluetooth Low Energy (v4.x / 5.x)
Frequency: band 2.402 to 2.480 GHz
Channel spacing: 2 MHz
Sensitivity: -96 dBm
TX power: 4dBm (max)
Antenna type: Planar Inverted F-antenna
Antenna gain: 2dBi
Power supplyPower voltage: 44–57Vdc (PoE)
Power connector: IP-rated RJ45 connector (cable gland option on demand)
Current: 40 mA @50Vdc (typ)
Mechanical specificationsMaterial: UV-protected Polystyrene (PS) plastic
Color: Light gray
Size: 185 x 185 x 65 mm
Weight: 500 gr
Assembly: 4x screws on back panel
Mounting options: Pole mounting kit (included)
Environmental specificationsOperating temperature -40°C to +65°C
Storage temperature -40°C to +80°C