Ultra Deluxe Wirepas

Ultra Deluxe Wirepas is equipped with temperature, humidity, pressure and CO2 sensors.

Ultra Deluxe Wirepas is an indoor anchor tag, based on nRF52832 chipset, with full support of Wirepas Mesh 2.4GHz features.

Ultra Deluxe Wirepas has innovative features for the market: directive antenna with circulaly-polarized polarization, two power options (4x AA alkaline batteries and external USB power supply). It is the optimal solution as fixed mesh anchor for indoor positioning and tracking (directive antenna reduces multipath and increase accuracy for room/floor detection).

General features

Software: Wirepas Mesh 2.4GHz v5.x
Operating modes: Router mode (anchor tag): mesh network node
Configuration and diagnostics: Wirepas Network Tool, Wirepas gateway APIs, MeshCube APIs
Beaconing: configurable (disable, iBeacon, Safety, Quuppa Emulation Mode)
Beaconing interval: 100 msec to 1 hour (configurable for each state)
Beaconing power: -40, -20 to 4 dBm with 4 dB steps (configurable for each state)

Radio

Version: Wirepas Mesh 2.4GHz, Bluetooth Low Energy (advertising-only)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed circularly-polarized 3dBc directive antenna

Power

Type: battery and USB
USB: microUSB connector, 5VDC
Battery: 4xAA LR6 alkaline (5600 mAh typ. capacity at 25°C)
Replaceable: Yes
Expected life: 2.4 to 12 years in Anchor Mode, 24/7 at ambient temperature (battery-only)
Operating temperature: -20°C to +60°C

Sensors and interfaces

Sensors: temperature, humidity, pressure, CO2, button
Temperature: ± 0.2°C (0 to 70°C), ± 0.3°C (-40 to 100°C)
Humidity: 3%RH (0 to 85%RH), 4%RH (85 to 95%RH)
Atmospheric pressure: ±9Pa (900 to 1100hPa, 25 to 40°C), ±50Pa (300 to 1100hPa, 0 to 65°C)
CO2: ± 40 ppm + 5% (400 to 5000 ppm); Range: 400 to 32768 ppm
LED: 1 (red)

Enclosure

Material: ABS
Color: white
Size: 100 x 100 x 35 mm (excluding flange), 124 x 100 x 35 mm (including flange)
Weight: 197 gr (including flange)
Protection: IP20