Quuppa Angle of Arrival
Badge-Holder Quuppa
Thanks to its holder for ISO/IEC 7810 cards, with IP67 rating, Badge-Holder Quuppa is suitable for the identification and localization of people and operators.
-Equipped with 3-axis accelerometer for motion detection
-Based on Nordic nRF52832
-Firmware based on Quuppa libraries
Keyfob Tag Quuppa is powered by 2x replaceable CR2032 batteries.
The batteries are NOT replaceable.
Equipped with a call button, for geo-localised calls.
The Quuppa Approved marking is granted to Quuppa Compatible tags after they have passed Quuppa testing program to ensure they meet the high-quality standards for software, hardware, and mechanics. Quuppa Approved tags have native support for all Quuppa SW features, including back-channel for commanding and configuration, OTA FW upgrading, Quuppa proprietary channels.
Firmware based on native Quuppa libraries (Quuppa Compatible)
Tested for software, hardware, and mechanics by Quuppa (Quuppa Approved)
Supports back-channel communication for configuration and triggering actions on tag, proprietary channels, OTA FW upgrade
Configuration options: configurable with Quuppa Site Planner
TX power: -40, -20 to 4 dBm (with 4 dB steps)
Advertising channels: Bluetooth LE (2402, 2426, 2480 MHz) or Quuppa proprietary (2401, 2403, 2481 MHz)
Advertising interval: 0.1 to 10 secs (Bluetooth LE channel); 0.02 to 10 secs (Quuppa proprietary channel)
Quuppa ID: MAC address or custom ID
Version: Quuppa Intelligent Locating System protocol, Bluetooth Low Energy (advertising-only)
Frequency: 2.401 to 2.481 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Antenna gain: 2 dB (average)
Antenna pattern: omnidirectional
Replaceable: No
Model: CP224147 (800 mAh typ. capacity at 25°C)
Expected life: 2 month (33 Hz) to 15 years (0.1 Hz) at 0 dBm, 24/7 at ambient temperature
Operating temperature: -20°C to +60°C
Accelerometer: 3-axis linear accelerometer
Button: user configurable
Led: 2 (green, orange)
Material: ABS plastic
Color: white
Size: 95 x 64 x 7 mm
Weight: 24 gr
Fastening: 2x holes for lanyard/ring/badge-clip (horizontal and vertical)
Host card: ISO/IEC7810 ID-1 (85,6 x 54 x 0.76 mm)
Protection: IP67
CE (EU), FCC (US) [2.481 GHz not available for FCC]
Customization services
Devices are supplied in a “white-label” enclosure: custom silk-screen or digital printing available on demand.
Possibility of supplying beacons with pre-configured parameters to customer specifications.
Implementation and integration of custom features and functionalities.