Quuppa Angle of Arrival
MicroTag Quuppa
MicroTag Quuppa is suitable for small asset location and tracking.
-Equipped with 3-axis accelerometer for motion detection.
-Based on Nordic nRF52832
-Firmware based on Quuppa libraries
MicroTag Quuppa is powered by a replaceable CR2032 battery.
The battery is easily replaceable.
-Hole for fastening
-Compact size with reduced thickness
The Quuppa Approved marking is granted to Quuppa Compatible tags after they have passed Quuppa testing program to ensure they meet the high-quality standards for software, hardware, and mechanics. Quuppa Approved tags have native support for all Quuppa SW features, including back-channel for commanding and configuration, OTA FW upgrading, Quuppa proprietary channels.
Firmware based on native Quuppa libraries (Quuppa Compatible)
Supports back-channel communication for configuration and triggering actions on tag, proprietary channels, OTA FW upgrade
Configuration and diagnostics: QSP (Quuppa Site Planner), QPE (Quuppa Positioning Engine)
TX power: -40, -20 to 4 dBm (with 4 dB steps)
Advertising channels: Bluetooth LE CH37 (2402 MHz) or Quuppa proprietary (2401, 2403, 2481 MHz)
Advertising interval: 0.1 to 10 secs (Bluetooth LE channel); 0.01 to 10 secs (Quuppa proprietary channel)
Quuppa ID: MAC address or custom ID
Version: Quuppa Intelligent Locating System protocol, Bluetooth Low Energy (advertising-only)
Frequency: 2.401 to 2.481 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Antenna gain: 2 dB (average)
Antenna pattern: omnidirectional
Replaceable: Yes
Model: 1x Panasonic CR2032 (220 mAh typ. capacity at 25°C)
Expected life: 15 days (33 Hz) to 5 years (0.1 Hz) at 0 dBm, 24/7 at ambient temperature
Operating temperature: -20°C to +60°C
Accelerometer: 3-axis linear accelerometer
Interfaces: 1x LED (blue)
Material: ABS plastic
Color: white
Size: 36 x 23 x 5 mm
Weight: 6.5 gr
Fastening: 1 hole screw or cable-tie, dual-sided adhesive.
Protection: –
CE (EU), FCC (US) (pending)
Customization services
Devices are supplied in a “white-label” enclosure: custom silk-screen or digital printing available on demand.
Possibility of supplying beacons with pre-configured parameters to customer specifications.
Implementation and integration of custom features and functionalities.