Wirepas Mesh 2.4GHz
SafeX Plus Wirepas
Thanks to its IP65 case with eyelet for lanyard, SafeX Plus Wirepas is suitable for the identification and localization of people and operators.
-Equipped with 3-axis accelerometer for motion detection.
-Based on Nordic nRF52832
-Firmware based on Wirepas libraries
SafeX Plus Wirepas is powered by rechargeable lithium battery.
Equipped with button, 2x LEDs, vibration, buzzer.
Wirepas Mesh is a wireless network protocol that uses a multi-hop, self-organizing, and decentralized design. Decentralized network topology enables extremely dense network deployment. Wirepas Mesh protocol is used for indoor localization MeshCube platform with cable-less infrastructure: all devices (mobile tags and anchors) are battery operated.
Software: Wirepas Mesh 2.4GHz v5.x
Operating modes: Non-router mode – Mobile tag (periodic or on-event transmission of identifier and location)
Configuration and diagnostics: Wirepas Network Tool, Wirepas gateway APIs, MeshCube APIs
Mobile tag operating states: default, motion, alarm (button, free-fall, man-down, …), sleep
Positioning interval: 15 secs to 18 hours (configurable for each state)
Positioning state-timeout: 15 secs to 18 hours (configurable for each state)
Beaconing: configurable (disable, iBeacon, Safety, Quuppa Emulation Mode)
Beaconing interval: 100 msec to 1 hour (configurable for each state)
Beaconing power: -40, -20 to 4 dBm with 4 dB steps (configurable for each state)
Version: Wirepas Mesh 2.4GHz, Bluetooth Low Energy (advertising only)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Power supply: Rechargeable battery (USB Type-C interface)
Replaceable: No
Model: LiPo battery (240 mAh typ. capacity at 25°C)
Expected life with 100% recharge: 6 months* at 5 minutes interval (24/7 at ambient temperature) [*recharge cycle should be < 6 months]
Operating temperature: -20°C to +60°C
Sensors: 3-axis linear accelerometer, 2 buttons (1 on/off button, 1 alarm button)
User interfaces: RGB LED, buzzer, vibration motor
Material: ABS + PC & TPU
Color: white
Size: 73 x 41 x 17 mm
Weight: 37 gr (without accessories)
Wearability: lanyard
Protection: IP65
Customization services
Devices are supplied in a “white-label” enclosure: custom silk-screen or digital printing available on demand.
Possibility of supplying beacons with pre-configured parameters to customer specifications.
Implementation and integration of custom features and functionalities.