Wirepas Mesh 2.4GHz
Slim Tag Wirepas
Thanks to its case with flexible fastening options, Slim Tag Wirepas is suitable for asset identification and location.
-Equipped with 3-axis accelerometer for motion detection.
-Based on Nordic nRF52832
-Firmware based on Wirepas libraries
Slim Tag Wirepas is powered by 2x replaceable CR2032 batteries.
The batteries are easily replaceable.
-Splash-proof case
-Optional version with button and LEDs
-EN60601-1-2 (EMC for medical equipments) certification
Progetto ATLAS
Wirepas Mesh is a wireless network protocol that uses a multi-hop, self-organizing, and decentralized design. Decentralized network topology enables extremely dense network deployment. Wirepas Mesh protocol is used for indoor localization MeshCube platform with cable-less infrastructure: all devices (mobile tags and anchors) are battery operated.
Software: Wirepas Mesh 2.4GHz v5.x
Operating modes: Non-router mode – Mobile tag (periodic or on-event transmission of identifier and location)
Configuration and diagnostics: Wirepas Network Tool, Wirepas gateway APIs, MeshCube APIs
Mobile tag operating states: default, motion, alarm (button, free-fall, man-down), sleep
Positioning interval: 15 secs to 18 hours (configurable for each state)
Positioning state-timeout: 15 secs to 18 hours (configurable for each state)
Beaconing: configurable (disable, iBeacon, Safety, Quuppa Emulation Mode)
Beaconing interval: 100 msec to 1 hour (configurable for each state)
Beaconing power: -40, -20 to 4 dBm with 4 dB steps (configurable for each state)
Version: Wirepas Mesh 2.4GHz, Bluetooth Low Energy (advertising-only)
Frequency: 2.402 to 2.480 GHz
Module: Nordic SoC nRF52832 (MCU and transceiver)
Antenna: printed meandered planar F-antenna
Antenna gain: 2 dB (average)
Antenna pattern: omnidirectional
Replaceable: Yes
Model: 2x Panasonic CR2032 (450 mAh typ. capacity at 25°C)
Expected life: 15 months at 5 minutes interval, 7.5 years at 6 hours interval (24/7 at ambient temperature)
Operating temperature: -20°C to +60°C
Accelerometer: 3-axis linear accelerometer
Material: ABS plastic
Color: white
Size: 67 x 33 x 9 mm
Weight: 18 gr
Fastening: cable ties, screws, cord or double-sided tape.
Protection: IP54, splash-proof
CE (EU), FCC (US)
EN60601-1-2 (EMC for medical equipments)
Customization services
Devices are supplied in a “white-label” enclosure: custom silk-screen or digital printing available on demand.
Possibility of supplying beacons with pre-configured parameters to customer specifications.
Implementation and integration of custom features and functionalities.